4×6 Double T&G-V Roof Decking

  • *4×6 Southern Pine
  • *#1 Face
  • *3-7/16” Thick
  • *5” Coverage *
  • *Predrilled with spikes
  • *Mostly sold Random Length Endmatched
  • *Commonly spans 12’ or 14’ **
  • *Max Eave = 4′
  • *Available SillBor Clear Treated and KDAT ***
  • *Available Pre-Stained (orders over 3,000 sq ft)

Our 3×6 Southern Pine #1 Face T&G-V Roof Decking comes predrilled with spikes for driving horizontally through the board into the previous piece which pulls them together nicely.  The product comes endmatched meaning it is tongue and grooved on the ends so the boards do not have to meet on supports.   Scroll down below for options.

*Ballpark pricing below*

Discounts over 3,000 sq. ft.

per sq. ft. – min order = 500 sq. ft.

$12.00

OPTIONS FOR ORDERS LARGER THAN 3,000 SQ FT:

Factory Prestainingwe apply your choice of Sherwin Williams Oil-Based Superdeck Semi-Transparent stain colors or their clear sealer. Additional charge is usually around $1.50 per sq ft.

Factory Fire Treatingwe apply Flame Stop II Class A topical treatment. Additional charge is usually around $1.50 per sq ft. If you need it Prestained as well it will require TWO coats of water based (cannot use oil based) stain making the total additional charge for Fire Treating plus Prestaining around $4.50 per sq ft.

OTHER SPECIES

Note: For other species options in 4×6 Decking please see our Interlock Laminated Decking where we can glue different species to the face to give you the look you are going for.

DISCLAIMERS

* Note: Our 3×6 Decking covers 5” rather than the 5.25” shown in most pattern books.

**Note: Span capabilities are affected by several factors such as roof slope, wind loads, and snow loads. These differ from area to area and are governed by established building codes. Always consult local building codes and/or an engineer to ensure that the decking you are using is the correct thickness for your project.

***Note: KDAT lumber tends to have more surface checks than normal.

Click below for PDF Resources

Solid Decking tables, technical data, and installation

Flame Stop II

SillBor Clear Treated
NOTE:  This treatment is for interior use only.
NOTE:  This treatment is normally dyed blue for identification purposes however for roof decking applications we have them treat it without the dye so it remains clear.

Shopping cart